Delay – LinPlug RMV User Manual
Page 92
Signal Path
Delay
The Delay effect can be used to create "echoes" and other related effects. It features
controls for Wet, Time, Fract, Filter and Feedback.
Wet:
The Wet control is used to set the balance between the processed
"wet" signal and the original unprocessed "dry" signal.
Time:
The Time control is used for setting the delay time (in milliseconds).
This can range from 1 ms to 680 ms.
Fract:
The Fract popup menu is used to synchronise the delay time with the
current tempo (see Appendix B for the range of possible sync
settings).
Filter:
The Delay effect incorporates a variable low pass/high pass 6dB/Oct
filter which is adjusted using the Filter control. Turning the control to
the left introduces low pass filtering while turning the control to the
right introduces high pass filtering.
Feedback:
The Feedback control is used to set the number of times the signal
repeats or "echoes". Turning the control to the right increases the
number of echoes that are added to the input signal.
LinPlug
Reference Manual 5.0.1
92