LinPlug RMV - Manual (Page 41)

Audio Modules
Osc(illator) Freq(uency): The setting of the Osc(illator) Freq(uency) control determines
the drum's fundamental frequency. The frequency changes from low
to high as the control is turned in a clockwise direction. This control
interacts with the Tune control on the associated Pad.
Osc(illator) Delay (Time): The Osc(illator) Delay (Time) control is used to set the delay
time between the triggering of the oscillator and the time it starts
playing. The delay time increases as the dial is turned in a clockwise
direction.
Osc(illator) Decay (Time): The Osc(illator) Decay (Time) control determines how fast the
pitched oscillator output decays after it is triggered. The decay time
increases as the dial is turned in a clockwise direction.
Osc(illator) Knarks: The Osc(illator) "Knarks" control varies the amount of
crossmodulation between the pitched and noise oscillators.
Mix: The Mix control is used to set the relative amounts of the pitched
oscillator and the noise oscillator in the output signal. Rotating the
control in the anti-clockwise direction increases the proportion of
pitched oscillator signal in the output, while rotating the control in the
clockwise direction increases the proportion of noise signal in the
output.
LinPlug Reference Manual 5.0.1 41