RIGOL DG1000Z Series - Manual (Page 42)

RIGOL Chapter 1 Quick Start
1-24 DG1000Z User’s Guide
Installation Procedure
CAUTION
Only authorized operator can execute the installation operation. Improper
installation might result in damage of the instrument or incorrect
installation of the instrument on the rack.
1. First remove the handles of the instrument (hold the handles by sides of the
instrument and pull them outward). And then remove the four rubber pads at
the front and rear panel of the instrument respectively.
2. Fix the fixing part on one side of the front panel of the instrument using two M4
screws.
3. Fix the front filler panel on the other side of the front panel of the instrument
using two M4 screws.