PLANET ISW-1022MPT - Manual (Page 10)

User’s Manual of ISW-1022M Series and ISW-1033MT
10
1.4 Product Specification
1.4.1 ISW-1022M / ISW-1022MT Product Specification
Product ISW-1022M ISW-1022MT
Hardware Specification
Copper Ports
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
2 10/100/1000Base-T RJ-45 port
SFP/mini-GBIC Slots 2 SFP interfaces, shared with Port-9 and Port-10
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps / non-blocking
Switch Throughput 8.3Mpps@64Bytes
Address Table 8K entries
Share Data Buffer 1Mbit
Flash 4Mbytess
DRAM 32Mbytes
Maximum Frame Size 1522 Bytes packet
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED
System :
Power (Green)
Power 1 (Green)
Power 2 (Green)
Fault (Red)
8 port 10/100 :
Link/Activity (Green)
Full duplex/Collision (Yellow)
SFP port :
LNK/ACT(Green)
1000T: LNK/ACT(Green), 1000M(Green)
Console Interface One RJ-45-to –RS-232 male connector for switch management
Power Supply
External Power Supply: DC 12~48V, Redundant power DC 12~48V and
connective removable terminal block for master and slave power
Power Consumption 8.16 Watts (Full load)
Operating Temperature -10 Degree C~60 Degree C -40 Degree C~75 Degree C
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 Degree C ~ 85 Degree C
Case Dimension IP-30, 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm