PLANET ISW-1022MPT - Manual (Page 140)

User’s Manual of ISW-1022M Series and ISW-1033MT
bandwidth out
[Value]
Set interface output
bandwidth. Rate Range is
from 100 kbps to 102400 kbps
or to 256000 kbps for giga
ports,
and zero means no limit.
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth out 100
show bandwidth I Show interfaces bandwidth
control
switch(config)#interface fastEthernet 2
switch(config-if)#show bandwidth
state
[Enable | Disable]
I Use the state interface
configuration command to
specify the state mode of
operation for Ethernet ports.
Use the disable form of this
command to disable the port.
switch(config)#interface fastEthernet 2
switch(config-if)#state Disable
show interface configuration I show interface configuration
status
switch(config)#interface fastEthernet 2
switch(config-if)#show interface
configuration
show interface status I show interface actual status switch(config)#interface fastEthernet 2
switch(config-if)#show interface status
show interface accounting I show interface statistic
counter
switch(config)#interface fastEthernet 2
switch(config-if)#show interface accounting
no accounting I Clear interface accounting
information
switch(config)#interface fastEthernet 2
switch(config-if)#no accounting
140