PLANET ISW-1022MPT - Manual (Page 142)

User’s Manual of ISW-1022M Series and ISW-1033MT
6.4 VLAN Commands Set
Commands Level Description Example
vlan database P Enter VLAN configure mode switch#vlan database
Vlanmode
[portbase| 802.1q | gvrp]
V To set switch VLAN mode. switch(vlan)#vlanmode portbase
or
switch(vlan)#vlanmode 802.1q
or
switch(vlan)#vlanmode gvrp
no vlan V No VLAN Switch(vlan)#no vlan
Ported based VLAN configuration
vlan port-based grpname
[Group Name]
grpid
[GroupID]
port
[PortNumbers]
V Add new port based VALN switch(vlan)#vlan port-based grpname test
grpid 2 port 2-4
or
switch(vlan)#vlan port-based grpname test
grpid 2 port 2,3,4
show vlan [GroupID]
or
show vlan
V Show VLAN information switch(vlan)#show vlan 23
no vlan group
[GroupID]
V Delete port base group ID switch(vlan)#no vlan group 2
IEEE 802.1Q VLAN
vlan 8021q name
[GroupName]
vid
[VID]
V Change the name of VLAN
group, if the group didn’t exist,
this command can’t be
applied.
switch(vlan)#vlan 8021q name test vid 22
vlan 8021q port
[PortNumber]
access-link untag
[UntaggedVID]
V Assign a access link for VLAN
by port, if the port belong to a
trunk group, this command
can’t be applied.
switch(vlan)#vlan 8021q port 3 access-link
untag 33
vlan 8021q port
[PortNumber]
trunk-link tag
[TaggedVID List]
V Assign a trunk link for VLAN
by port, if the port belong to a
trunk group, this command
can’t be applied.
switch(vlan)#vlan 8021q port 3 trunk-link tag
2,3,6,99
or
switch(vlan)#vlan 8021q port 3 trunk-link tag
3-20
vlan 8021q port
[PortNumber]
hybrid-link untag
[UntaggedVID]
V Assign a hybrid link for VLAN
by port, if the port belong to a
trunk group, this command
can’t be applied.
switch(vlan)#vlan 8021q port 3 hybrid-link
untag 4 tag 3,6,8
or
switch(vlan)#vlan 8021q port 3 hybrid-link
142