PLANET ISW-1022MPT - Manual (Page 59)

User’s Manual of ISW-1022M Series and ISW-1033MT
59
The page includes the following fields:
Object Description
Syslog Client Mode:
Select the system log mode—Client Only, Server Only, or Both.
„ Client Only : the system event log will only be sent to this interface of the
switch
„ Server Only : the system log will only be sent to the remote system log
server with its IP assigned.
„ Both : the system event log will be sent to the remote server and this
interface.
System Log Server IP
Address:
When the ‘Syslog Mode’ item is set as Server Only/Both, the user has to assign
the system log server IP address to which the log will be sent.
5.4.5.2 System Event Log—SMTP Configuration
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across the network. You can configure
the SMTP server IP, mail subject, sender, mail account, password, and the recipient email addresses which the e-mail
alert will send to. There are also five types of event— Device Cold Start , Device Warm Start , Authentication Failure ,
X-Ring Topology Change , and Port Event —available to be issued as the e-mail alert. Besides, this function provides
the authentication mechanism including an authentication step through which the client effectively logs in to the SMTP
server during the process of sending e-mail alert.
Figure 5-12 SMTP Configuration interface