PLANET ISW-1022MPT - Manual (Page 149)

User’s Manual of ISW-1022M Series and ISW-1033MT
6.11 802.1x Commands Set
Commands Level Description Example
8021x enable G Use the 802.1x global
configuration command to
enable 802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x system radius
IP global configuration
command to change the radius
server IP.
switch(config)# 8021x system radiusip
192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x system server
port global configuration
command to change the radius
server port
switch(config)# 8021x system serverport
1812
8021x system accountport
[port ID]
G Use the 802.1x system
account port global
configuration command to
change the accounting port
switch(config)# 8021x system accountport
1813
8021x system sharedkey
[ID]
G Use the 802.1x system share
key global configuration
command to change the
shared key value.
switch(config)# 8021x system sharedkey
123456
8021x system nasid
[words]
G Use the 802.1x system nasid
global configuration command
to change the NAS ID
switch(config)# 8021x system nasid test1
8021x misc quietperiod
[sec.]
G Use the 802.1x misc quiet
period global configuration
command to specify the quiet
period value of the switch.
switch(config)# 8021x misc quietperiod 10
8021x misc txperiod
[sec.]
G Use the 802.1x misc TX period
global configuration command
to set the TX period.
switch(config)# 8021x misc txperiod 5
8021x misc supptimeout [sec.] G Use the 802.1x misc supp
timeout global configuration
command to set the supplicant
timeout.
switch(config)# 8021x misc supptimeout 20
8021x misc servertimeout
[sec.]
G Use the 802.1x misc server
timeout global configuration
command to set the server
timeout.
switch(config)#8021x misc servertimeout 20
149