4 tftp, 1 update firmware, 2 restore configuration – PLANET ISW-1022MPT User Manual
Page 56
User’s Manual of ISW-1022M Series and ISW-1033MT
56
5.4.4 TFTP
It provides the functions allowing the user to update the switch firmware via the Trivial File Transfer Protocol (TFTP)
server. Before updating, make sure the TFTP server is ready and the firmware image is located on the TFTP server.
5.4.4.1 Update Firmware
Use this menu to download a file from specified TFTP server to the Managed Industrial Switch.
Figure 5-8
Update Firmware interface
The page includes the following fields:
Object
Description
TFTP Server IP Address:
Type in your TFTP server IP.
Firmware File Name:
Type in the name of the firmware image file to be updated.
5.4.4.2 Restore Configuration
You can restore a previous backup configuration from the TFTP server to recover the settings. Before doing that, you must
locate the image file on the TFTP server first and the Managed Industrial Switch will download back the flash image.
Figure 5-9
Restore Configuration interface