PLANET ISW-1022MPT - Manual (Page 16)

User’s Manual of ISW-1022M Series and ISW-1033MT
16
DI/DO
2 Digital Input (DI):Level 0: -30~2V
Level 1: 10~30V
Max. input current: 8mA
2 Digital Output(DO):Open collector to 40VDC, 200mA
Power Supply
External Power Supply: DC 12~48V, Redundant power DC 12~48V and
connective removable terminal block for master and slave power
Power Consumption 10.2 Watts
Operating Temperature Wide: -40 Degree C~75 Degree C
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 Degree C ~ 85 Degree C
Case Dimension IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Layer 2 function
Management Interface Console, Telnet, Web Browser, SNMP v1, v2c and v3
Port Configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status
VLAN
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups
Spanning Tree
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree
Link Aggregation Supports 4 groups of 4-Port trunk support
QoS
Traffic classification based on :
• Port Number,
• 802.1Q Tag,
• 802.1p priority,
• IP DSCP/TOS field in IP Packet
IGMP Snooping
v1 and v2
256 multicast groups and IGMP query
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
Port Mirror RX/TX/Both