PLANET ISW-1022MPT - Manual (Page 31)

User’s Manual of ISW-1022M Series and ISW-1033MT
31
2.2.2 DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Switch when out of factory. If the DIN-Rail is not screwed on the Industrial
Switch, please see the following pictures to screw the DIN-Rail on the Switch. Follow the steps below to hang the
Industrial Switch.
Figure 2-8 Rear Panel – DIN-Rail Kit
1. First, insert the top of DIN-Rail into the track.
Figure 2-9 DIN-Rail Mounting