PLANET ISW-1022MPT - Manual (Page 109)

User’s Manual of ISW-1022M Series and ISW-1033MT
Figure 5-53 QoS Configuration – TOS Priority
The table includes the following fields:
Object Description
TOS priority:
The system provides 0~63 TOS priority level. Each level has 4 types of
priority—High, Middle, Low, and Lowest. The default value is ‘Lowest’ priority
for each level. When the IP packet is received, the system will check the TOS
level value in the IP packet that has received. For example, the user sets the
TOS level 25 as high, the system will check the TOS value of the received IP
packet. If the TOS value of received IP packet is 25 (priority = high), and then the
packet priority will have highest priority.
109