PLANET ISW-1022MPT - Manual (Page 83)

User’s Manual of ISW-1022M Series and ISW-1033MT
83
Figure 5-31 VLAN – Port Based interface
„ Pull down the selection item and focus on Port Based then press Apply to set the VLAN Operation
Mode in Port Based mode.
Click
Add
to add a new VLAN group (The maximum VLAN groups are up to 64).
Figure 5-32 VLAN—Port Based Add interface
„
Enter the group name and VLAN ID. Add the selected port number into the right field to group these members
to be a VLAN group, or remove any of them listed in the right field from the VLAN.
„ And then, click Apply to have the configuration take effect.
„ You will see the VLAN list displays.