PLANET ISW-1022MPT - Manual (Page 47)

User’s Manual of ISW-1022M Series and ISW-1033MT
47
5. Web-Based Management
This section introduces the configuration and functions of the Web-Based management.
5.1 About Web-based Management
The Managed Industrial Switch offers management features that allow users to manage the Managed Industrial Switch
from anywhere on the network through a standard browser such as Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 6.0. It is based on Java Applets with an aim to reduce network
bandwidth consumption, enhance access speed and present an easy viewing screen.
By default, IE6.0 or later version does not allow Java Applets to open sockets. The user has to
explicitly modify the browser setting to enable Java Applets to use network ports.
The following screen based on ISW-1022M. For ISW-1022M series and ISW-1033MT, the WEB
UI display will be the same as ISW-1022M. The PoE function and Digital Inputs / Outputs function
will be described additional.
The Managed Industrial Switch can be configured through an Ethernet connection, make sure the manager PC must be
set on same the IP subnet address with the Managed Industrial Switch.
For example, the default IP address of the Managed Industrial Switch is 192.168.0.100, then the manager PC should be
set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If you have changed the default IP address of the Managed Industrial Switch to 192.168.1.1 with subnet mask
255.255.255.0 via console, then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254)
to do the relative configuration on manager PC.