PLANET ISW-1022MPT - Manual (Page 15)

User’s Manual of ISW-1022M Series and ISW-1033MT
15
Standards Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3af Power over Ethernet
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
Cable-Fiber-optic cable
• 50 / 125µm or 62.5 / 125µm multi-mode fiber cable, up to 220 / 550m
• 9 / 125µm single-mode cable, provides long distance for 10 / 15 / 20 / 30 / 40 / 50
/ 60 / 70 / 120km (very on fiber transceiver or SFP module)
Stability Testing
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
1.4.3 ISW-1033MT Product Specification
Product
ISW-1033MT
7-Port 10/100Mbps + 3-Port Gigabit TP/SFP Managed Industrial Switch
Hardware Specification
Copper Ports
7 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
3 10/100/1000Base-T RJ-45 port
SFP/mini-GBIC Slots 3 SFP interfaces, shared with Port-8, Port-9 and Port-10
Switch Architecture Store-and-Forward
Switch Fabric 7.4Gbps / non-blocking
Switch Throughput 5.5Mpps@64bytes
Address Table 8K entries
Share Data Buffer 1Mbit
Maximum Frame Size 1522 Bytes packet
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red)
8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
SFP port: LNK/ACT(Green), 1000T: LNK/ACT(Green), 1000M(Green)
Console Interface One RJ-45-to –RS-232 male connector for switch management