6 wiring the digital inputs / outputs (isw-1033mt) – PLANET ISW-1022MPT User Manual
Page 35
Advertising
User’s Manual of ISW-1022M Series and ISW-1033MT
35
2.2.6 Wiring the Digital Inputs / Outputs (ISW-1033MT)
There is another terminal block comprising two sets of digital input/output contacts on the top side of ISW-1033MT. Please
refer to chapter 5.8 for how to configure Digital Input/Output. The following illustration shows the pin assignment of the
DIDO connector. Please note do not connect DO0/DO1 to the external device using power higher than 40V/200mA.
Advertising
This manual is related to the following products: