PLANET ISW-1022MPT - Manual (Page 101)

User’s Manual of ISW-1022M Series and ISW-1033MT
101
before and click Remove .
The strings of Public_RO and Private_RW are default strings. You can remove
them but after resetting the switch to default, the two strings show up again.
Agent Mode:
Select the SNMP version that you want to use it. And then click Change to
switch to the selected SNMP version mode.
5.6.3.2 Trap Configuration
A trap manager is a management station that receives the trap messages generated by the switch. If no trap manager is
defined, no traps will be issued. To define a management station as a trap manager, assign an IP address, enter the
SNMP community strings, and select the SNMP trap version.
Figure 5-44 Trap Managers interface
The page includes the following fields:
Object Description
IP Address: Enter the IP address of the trap manager.
Community: Enter the community string for the trap station.
Trap Version: Select the SNMP trap version type—v1 or v2c.