PLANET ISW-1022MPT - Manual (Page 147)

User’s Manual of ISW-1022M Series and ISW-1033MT
trap-version
[v1|v2c]
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G Configure the context name switch(config)#snmpv3 context-name Test
snmpv3 user
[User Name]
group
[Group Name]
password
[Authentication Password]
[Privacy Password]
G Configure the userprofile for
SNMPV3 agent. Privacy
password could be empty.
switch(config)#snmpv3 user test01 group G1
password AuthPW PrivPW
snmpv3 access context-name
[Context Name ]
group
[Group Name ]
security-level
[NoAuthNoPriv|AuthNoPriv|Auth
Priv]
match-rule
[Exact|Prifix]
views
[Read View Name] [Write View
Name] [Notify View Name]
G Configure the access table of
SNMPV3 agent
switch(config)#snmpv3 access context-name
Test group G1 security-level AuthPriv
match-rule Exact views V1 V1 V1
snmpv3 mibview view
[View Name]
type
[Excluded|Included]
sub-oid
[OID]
G Configure the mibview table of
SNMPV3 agent
switch(config)#snmpv3 mibview view V1
type Excluded sub-oid 1.3.6.1
show snmp P Show SNMP configuration switch#show snmp
no snmp community-strings
[Community]
G Remove the specified
community.
switch(config)#no snmp community-strings
public
no snmp-server host
[Host-address]
G Remove the SNMP server
host.
switch(config)#no snmp-server host
192.168.1.50
no snmpv3 user
[User Name]
G Remove specified user of
SNMPv3 agent.
switch(config)#no snmpv3 user Test
no snmpv3 access context-name
[Context Name ]
group
G Remove specified access
table of SNMPv3 agent.
switch(config)#no snmpv3 access
context-name Test group G1 security-level
AuthPr
147