2 port commands set, Ommands – PLANET ISW-1022MPT User Manual
Page 139
User’s Manual of ISW-1022M Series and ISW-1033MT
6.2 Port Commands Set
Commands
Level
Description
Example
interface fastEthernet
[Portid]
G
Choose the port for
modification.
switch(config)#interface fastEthernet 2
duplex
[full | half]
I
Use the duplex configuration
command to specify the
duplex mode of operation for
Fast Ethernet.
switch(config)#interface fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I
Use the speed configuration
command to specify the speed
mode of operation for Fast
Ethernet., the speed can’t be
set to 1000 if the port isn’t a
giga port..
switch(config)#interface fastEthernet 2
switch(config-if)#speed 100
no flowcontrol
I
Disable flow control of
interface
switch(config-if)#no flowcontrol
security enable
I
Enable security of interface
switch(config)#interface fastEthernet 2
switch(config-if)#security enable
no security
I
Disable security of interface
switch(config)#interface fastEthernet 2
switch(config-if)#no security
bandwidth type all
I
Set interface ingress limit
frame type to “accept all
frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type all
bandwidth type
broadcast-multicast-flooded-uni
cast
I
Set interface ingress limit
frame type to “accept
broadcast, multicast, and
flooded unicast frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-multicast-flooded-unicast
bandwidth type
broadcast-multicast
I
Set interface ingress limit
frame type to “accept
broadcast and multicast
frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-multicast
bandwidth type broadcast-only
I
Set interface ingress limit
frame type to “only accept
broadcast frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-only
bandwidth in
[Value]
I
Set interface input bandwidth.
Rate Range is from 100 kbps
to 102400 kbps or to 256000
kbps for giga ports,
and zero means no limit.
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth in 100
139