PLANET ISW-1022MPT User Manual
Page 13
User’s Manual of ISW-1022M Series and ISW-1033MT
13
Flow Control
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED
System
:
Power (Green)
Power 1 (Green)
Power 2 (Green)
Fault (Red)
8 port 10/100
:
Link/Activity (Green)
Full duplex/Collision (Yellow)
SFP port
:
LNK/ACT(Green)
1000T: LNK/ACT(Green), 1000M(Green)
8 PoE power output
:
PoE In-Use (Green)
Console Interface
One RJ-45-to –RS-232 male connector for switch management
Power Supply
External Power Supply: DC 48V
Redundant power DC 48V
Removable terminal block for master and slave power
Power Consumption
128 Watts (Full load)
Operating Temperature
-40 Degree C~75 Degree C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40 Degree C ~ 85 Degree C
Case Dimension
IP-30, 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm
Power over Ethernet
PoE Standard
IEEE 802.3af PSE (Power Sourcing Equipment)
Units can be Powered
8
PoE Power Output
48V DC, Max. 15.4 watts, 350mA
Power Pin Assignment
1/2(+), 3/6(-)
Management Functions
Management Interface
Console, Telnet, Web Browser, SNMP v1, v2c and v3
Port Configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status
VLAN
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups