Zoom H4n Pro 4-Input / 4-Track Portable Handy Recorder Kit with Protective Case (Black) - Manual (Page 141)

145
Reference / MTR mode effect types and parameters
MTR mode effect types and parameters
CRY This effect varies the sound like a talking modulator.
(1) RANGE 1–10 Adjusts the frequency band affected.
(2) RESONANC 0–10 Sets the amount of resonance.
(3) SENSE
−10–−1,
1–10
Sets the effect sensitivity.
(4) BALANCE 0–100
Adjusts the balance of the original and effect
sounds.
PITCH This effect shifts the pitch up or down
(1) SHIFT
−12–+12,
24
Sets the pitch shift in semitones.
(2) TONE 0–10 Adjusts the tone.
(3) FINE −25–+25 Adjusts the pitch shift in cents (1/100 semitone).
(4) BALANCE 0–100
Adjusts the balance of the original and effect
sounds.
● Delay/reverb effects
AIR
This effect reproduces the reverberant atmosphere of a
room and provides spatial depth.
(1) SIZE 1–100 Sets the size of the space.
(2) REFLEX 0–10 Sets the amount of wall reflections.
(3) TONE 0–10 Adjusts the tone.
(4) MIX 0–100
Adjusts the amount of effect sound mixed with
the original sound.
DELAY This delay supports long delay times of up to 5000 ms.
ECHO
This tape echo simulation supports long delay times of up
to 5000 ms.
ANALOG
This warm analog delay simulation supports long delay
times of up to 5000 ms.
The 3 effects above have the same parameters.
(1) TIME
1–5000 ms, ♪
(See P.146)
Sets the delay time.
(2) FEEDBACK 0–100 Adjusts the amount of feedback.
(3) HIDAMP 0–10
Adjusts the damping of high frequencies in the
delay sound.
(4) MIX 0–100
Adjusts the amount of effect sound mixed with
the original sound.