MACKIE HDR24/96 - Manual (Page 133)

HDR 24/96
Appendix A – Menu Tables
GUI Menus
Following is a description of the selections under the top-level pull-down menus. Many of these
functions are described in detail in other sections of this manual. This table will be helpful in locating
the correct menu for the function that you wish to select. If a menu selection has a shortcut from the
keyboard, the shortcut keys are listed next to the selection.
Functions within the Setup menu, located under the Windows menu, are found at the end of the top-
level menu section.
File
Menu Item What It Does
New Project
([C TRL +n])
Opens a new project for recording.
If there is a project currently open that has not been saved, you will
be prompted to save it first.
A dialog box allows you to choose between the Internal and
External (if installed) disk drive, and to enter a project name.
Although the actual sample rate for the project is set from the
Setup | Sync dialog should you wish to change it from the default
setting (the sample rate of the last open project) you must select the
basic clock rate of 44.1/48 or 88.2/96 kHz from this menu. Click the
appropriate check box.
Clicking on NEW will create the necessary files to contain the
project and open the project with a blank track screen.
If a template has been saved (see Save As New Template), project
characteristics, including track names, will be taken from the
template. Otherwise default template characteristics will be used for
the new project.
Open Project Opens an existing project.
Technical Reference 133