MACKIE HDR24/96 - Manual (Page 160)

HDR 24/96
<< >>
Selects the Hour of day on a 24-hour
clock (e.g. 16 = 4 p.m.)
Year
After
Page Rt 
button
OK
Returns to File System Clock page 1
(time and day). Same as pressing
Page Back button. Year values
remain as set regardless of how you
navigate out of this menu – i.e. there is
no Cancel.
About
Displays the software version. Exit returns to the
SYSTEM MENU
DIGITAL I/O
These menu selections are only applicable when DIO-8 and PDI-8 I/O cards are installed. If
Analog or OPT-8 digital I/O cards are installed, the type of card will be displayed, but no settings
are required.
Menu Selection Submenus What It Does
Selects the type of input port for each of the DIO-8 cards
1-8
Selects the Track 1-8 card for setup (or merely
displays other I/O or the absence of I/O in this slot).
See below for options.
9-16
Selects the Track 9-16 card for setup (or merely
displays other I/O or the absence of I/O in this slot).
See below for options.
17-24
Selects the Track 17-24 card for setup (or merely
displays other I/O or the absence of I/O in this slot).
See below for options.
ADAT Selects the ADAT port for input
In
For all
selections
above
TDIF Selects the TDIF port for input
Selects the type of output port for each of the DIO-8 cards
1-8
Selects the Track 1-8 card for setup (or merely
displays other I/O or the absence of I/O in this slot).
See below for options.
9-16
Selects the Track 9-16 card for setup (or merely
displays other I/O or the absence of I/O in this slot).
See below for options.
17-24
Selects the Track 17-24 card for setup (or merely
displays other I/O or the absence of I/O in this slot).
See below for options.
ADAT Selects the ADAT port for output
Out
For all
selections
above
TDIF Selects the TDIF port for output
HDR 24/96 160