Inter-Tel Axxess - Manual (Page 135)

Page 119
System Features
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
Station Feature Codes
Directory 307 (Display Phones Only) Allows display phone users to
search for extension numbers or system speed-dial num-
bers. The number can then be dialed, if desired. The
Directories premium feature is required.
Display Outside Party Name On/Off 379 (Display Phones Only) When the phone user enters this
feature code, while connected to a CO call that has out-
side party name information, the display will toggle
between the caller’s name and number. If there is no out-
side party name or the Expanded CO Call Information On
Displays flag is disabled, the user will hear a burst of reor-
der tone and see the CANNOT ACCESS FEATURE dis-
play. If the Display Outside Party Name On/Off feature
code is programmed in a user programmable button with
a lamp, the lamp will be lit when the outside party name is
enabled and off when the outside party number is
enabled.
Display Time/Date 300 (Display Phones Only) Temporarily displays the system
date and time, username, and extension number during a
call or when other displays are shown.
NOTE: Feature code 300 displays the IP Address of an
endpoint if it is in SIP mode (see page 105 ).
Do-Not-Disturb
Do-Not-Disturb Cancel
Do-Not-Disturb On/Off
370
371
372
The Do-Not-Disturb feature code halts all intercom calls,
transferred calls, and pages to the station. The Cancel
code returns the station to normal operation. The on/off
code can be used to turn Do-Not-Disturb on or off. (Inter-
Tel phones use the DND button.)
Do-Not-Disturb Override 373 (Inter-Tel Phones Only) If enabled in the database, allows
the phone user to break through another station’s Do-Not-
Disturb mode when placing an intercom call
Enhanced Speakerphone Enable 310 (Digital Phones Only) When entered at a Digital Phone
station, this feature code enables the enhanced speaker-
phone as described on
page 76 . (Digital Phones can also
use the Special button + Speaker buttons.)
Feature Key Default 395 (Inter-Tel Phones Only) Phones have user-programmable
feature buttons that can be set to enter feature codes.
This code returns the user-programmable buttons to the
database default values.
Group Listen 312 (Inter-Tel Phones Only) Allows a user to transmit a con-
versation over the phone speaker while in handset or
headset mode
Handsfree On/Off 319 (Inter-Tel Phones Only) Disables/enables the phone’s
handsfree intercom answering. Incoming intercom calls
ring as private calls if handsfree answering is disabled.
Headset Enable
Headset Disable
Headset On/Off
315
316
317
(Inter-Tel Phones Only) The enable code signals the sys-
tem that a headset has been connected to the phone. The
disable code returns the phone to normal operation. The
on/off feature code can be used to toggle the feature on or
off.
FEATURE NAME CODE DEFINITION (Continued)