Inter-Tel Axxess - Manual (Page 38)

Page 22
Administrator Procedures
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
System Programming
2. The display shows SWAP (extension) WITH EXTENSION. Enter the second
extension number to be swapped using the same methods previously
described. The display shows DATABASE UPDATED.
NOTE: If you cancel or terminate the feature without entering the second extension
number, the system discards any changes that have not yet been saved, and the
display shows NO UPDATE PERFORMED. If the entered extension is the adminis-
trator station performing the swap, the same extension number as the target station,
or the wrong device type, the display shows CONFLICTING EXTENSION.
5. When the display shows ENTER SYSTEM OPTION, press again to exit to the
ENTER DATABASE OPTION prompt.
6. When finished with all programming, press while the ENTER DATABASE
OPTION prompt is displayed. This ends the programming session.
7. If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one
of the following:
— Delayed Reset: Press or the DELAYED menu button to delay the reset. The
display shows DELAYED RESET SCHEDULED. The system will be reset at the
pre-programmed time.
— Immediate Reset: Press or the IMMEDIATE menu button to reset the system
now.
NOTE: A system reset will drop all calls in progress.
#
#
1
2