Inter-Tel Axxess User Manual

Page 32

Advertising
background image

Page 16

Administrator Procedures

AXXESS

®

ADMINISTRATOR’S GUIDE – January 2004

Station Programming

c. Toll Restriction: This option allows you to set the station class of service for day

and/or night modes. To select it, press

or the TOLL RESTRICTION menu but-

ton. Then do the following:

1. The display shows TOLL RESTRICTION OPTION. Press

or the COS

DAY menu button to program day mode toll restriction. Or, press

or the

COS NIGHT menu button to program night mode toll restriction.

2. The display shows SET DAY (or NIGHT) COS XX. If this is not the COS

you wish to program, scroll to the correct COS by pressing the high end of the
Volume button or NEXT to scroll forward, or press the low end of the Volume
button or PREVIOUS to scroll backward. The default COS numbers are as
follows. See

page 155

.

COS 01 – ARS Only

COS 02 – Deny Area/Office

COS 03 – Deny Operator

COS 04 – Deny Toll Access

COS 05 – Deny International

COS 06 – Deny Equal Access

COS 07 – Deny Local Calls

COS 08 – Denied Numbers

COS 09 – Allowed Numbers

3. When the correct COS is displayed, press

or the ON menu button to

enable the toll restriction. Or, press

or the OFF menu button to disable it.

4. If desired, repeat steps c2 and c3 to program additional COS toll restrictions.

5. Press

or

ACCEPT to save the COS programming. The display shows

DATABASE UPDATED and then returns to the TOLL RESTRICTION
OPTION prompt.

6. Press

again to exit to the ENTER STATION OPTION prompt.

6.

When the display shows ENTER STATION OPTION, press

again to exit to the

ENTER STATION EXTENSION prompt. You can then program another station by
repeating these steps or press

or ACCEPT once more to exit to the ENTER DATA-

BASE OPTION prompt.

7.

When finished with all programming, press

while the ENTER DATABASE

OPTION prompt is displayed. This ends the programming session.

8.

If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one
of the following:

Delayed Reset: Press

or

the

DELAYED menu button to delay the reset. The

display shows DELAYED RESET SCHEDULED. The system will be reset at the
pre-programmed time.

Immediate Reset: Press

or the IMMEDIATE menu button to reset the system

now.

NOTE:

A system reset will drop all calls in progress.

3

1

2

1

2

#

#

#

#

#

1

2

Advertising