Inter-Tel Axxess - Manual (Page 239)

Page 223
System Features
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
System Forward Enable/Disable
If the principal station receives a
manually forwarded call (not a sys-
tem forward), that call will not fol-
low the principal station’s system
forwarding path.
If an infinite forward loop results
from the combination of manual for-
wards and system forwarding paths,
the station that was originally
intended to receive the call will ring,
even if the station is in Do-Not-Dis-
turb.
SYSTEM FORWARD ENABLE/DISABLE
The station user has the option of entering feature codes that will disable or enable the use of
system forwarding at that station. Note that this flag does not affect the station’s appearance on
any other station’s call forwarding path. The flag merely determines whether the station will
have its own calls system forwarded.
T O ENABLE OR DISABLE SYSTEM FORWARDING :
•
Inter-Tel Phones: Enter the System Forward On (352), System Forward Off (353), or
System Forward On/Off (354) feature code. The display shows SYSTEM FORWARD
ON (or OFF). If disabled, the system will ignore any system forwarding paths pro-
grammed for this phone until you re-enable system forwarding.
•
Single-Line Sets: Lift the handset and enter the System Forward On (352), System For-
ward Off (353), or System Forward On/Off (354) feature code. If disabled, the system
will ignore any system forwarding paths programmed for this phone until you re-enable
system forwarding.
PRINCIPAL STATION IS MANUAL
FORWARD DESTINATION
Principal
Station
MANUAL
FORWARD
System
Forwarding Point
SYSTEM
FORWARD
Manually forwarded calls will
stop here and will not be sent
to System Forwarding Point
INFINITE LOOP CAUSED BY
SYSTEM AND MANUAL CALL FORWARD
MANUAL
FORWARD
MANUAL
FORWARD
SYSTEM
FORWARD
Calls received by this station
will not follow the manual
forward if other two stations are
unavailable.