Hookflash – Inter-Tel Axxess User Manual
Page 273
Page 257
System Features
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Hookflash
HOOKFLASH
A timed hookflash may be required for Inter-Tel phone and single-line users to use certain tele-
phone company or PBX features. The CO Hookflash feature code sends a timed hookflash
over the trunk when entered. A hookflash will restart the call cost display and toll restriction,
plus it will start a new line in the SMDR printout. However, the call will remain under the
same Call button.
The Hookflash feature can be enabled or disabled on a trunk group-by-trunk group basis. It can
be used on any outside call, including conference calls.
The duration of the hookflash can be changed by reprogramming the LS/GS CO Hookflash
timer (default value is 0.6 seconds). If the system is not installed behind a PBX, the Hookflash
timer must be programmed to be compatible with the system’s trunks.
T
O
SEND
A
TIMED
HOOKFLASH
WHILE
ON
A
TRUNK
:
Inter-Tel Phones: Press the Special button and enter the Hookflash feature code (330).
Single-Line Sets: Hookflash and then enter the Hookflash feature code (330).