Inter-Tel Axxess - Manual (Page 263)

Page 247
System Features
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
Remove from Paging
REMOVE FROM PAGING
An Inter-Tel phone user can prevent the phone from receiving pages or allow it to receive
pages again using these feature codes. If the phone is assigned to more than one page zone, all
zones are removed or replaced; the user cannot toggle individual zones.
T
O HALT OR ENABLE ZONE PAGES :
1. While on or off hook, enter the Page Receive On/Off feature code (325) to prevent the
phone from receiving pages. You hear a confirmation tone and the display shows PAGE
RECEIVE ON (or OFF).
2. If off hook, hang up.
DO-NOT-DISTURB
Placing a station in Do-Not-Disturb halts all pages, incoming intercom calls, camped-on calls,
and transferred calls to that station. Queue callbacks, recalls, and direct ring-in calls are not
blocked. Another user calling the station while it is in Do-Not-Disturb hears a repeating signal
of four fast tones and a pause (display phones show the Do-Not-Disturb message); the user
cannot camp on, but can queue or leave a message at the station.
NOTE: Direct ring-in calls that are forwarded to a station in DND will ring the DND station per
the rules of DND.
If desired, individual stations can be prevented from using Do-Not-Disturb by disabling the
Do-Not-Disturb option in the database.
If a hunt group station is in Do-Not-Disturb, calls to the user’s hunt group do not cause the
phone to ring, but the individual trunk button will flash if all other stations in the hunt group
are busy, forwarded, have hunt group remove enabled, or are in Do-Not-Disturb. Hunt group
announcement stations and overflow stations can use Do-Not-Disturb to block hunt group calls
by using Do-Not-Disturb.
Inter-Tel phones may be given Do-Not-Disturb override permission. These stations, when
reaching a station in Do-Not-Disturb, can enter the Do-Not-Disturb Override feature code
(373) to place a non-handsfree intercom call to the station. Single-line stations cannot be
enabled to use the Do-Not-Disturb Override feature.
When a station is placed in DND, the user may select one of 20 system-stored messages that
will appear on the top line of the display (unless Do-Not-Disturb is enabled while the user is on
a call or off hook, in which case message 1 is automatically selected). When a station in Do-
Not-Disturb is called by a display phone user, the caller sees the selected message.