Sony MDM-X4 User Manual
Page 12
12
EN
Names and Functions of Parts
Front Panel
1 HEADPHONES jack
Connect a pair of headphones with a standard type
plug.
2 ASSIGN SW 1,2 jack
For connecting external switches, such as a foot switch
(etc.).
See “System Settings” (page 17) for details regarding
the functions which can be controlled.
You can use either
or
type foot switches. When
the power is turned on, this unit registers the current
position of the connected pedal as “OFF”.
4 OUTPUT AUX 1/2 jacks
Output sound for use as the send output. After adding
an outboard effect to the sound output from these
jacks, use the RETURN 1/2 (L/R) jacks to input it back
to this unit.
Rear Panel
1 MIDI THRU jack
Outputs the same signal input to the MIDI IN jack.
2 MIDI OUT jack
Outputs the MIDI signal. Connect to the MIDI IN jack
of another piece of MIDI equipment.
3 MIDI IN jack
Inputs the signals output from the MIDI OUT jack of
another piece of MIDI equipment.
4 Power switch
Use to turn the power of this unit on and off.
5 MONITOR OUT jack
Outputs the sound of the monitor bus. Connect to a
pair of monitor speakers or an amplifier.
See “Connections for Recording” (page 13) for details.
6 STEREO OUT jack
Outputs the sound of the stereo bus. Connect to a DAT
deck (etc.) during mixdown.
See “Connections for Recording” (page 13) for details.
1
2
3
5
4
6
2
1