Sony MDM-X4 - Manual (Page 33)

33 EN
Editing Part of a Song (Track Edit)
During rehearsal mode, press the = or + key to
switch between increased or decreased volume after the
locate point.
3 Turn the jog dial to adjust the position of the
locate point.
The locate point moves in proportion to the
rotation of the jog dial each time the section is
repeated.
4
Press MARK.
The indicator on the MARK key starts blinking.
5
Press the key for the locate point you desire.
Playback stops and the locate point is set to the
new position.
To stop before completing the correction
Press p STOP to stop playback.
Notes
• Be sure to set the out point at a higher number than the in
point.
• Be sure to set the punch-in/out positions within the same
song.
Copying a Part (Track Copy)
You can copy part of a track and place it in another
location. If the location points are in the same position,
you can copy parts from more than one track at the
same time.
The original sound recorded after the destination point
is erased and rewritten by the part between the in and
out points.
Preparations
Set the following locate points before carrying out the
edit operation.
• IN point : the beginning of the part to be copied.
• OUT point : the end of the part to be copied.
• DEST (destination) point : the beginning of the part
to be rewritten.
See “Specifying the Location Points” (page 31) for
details on how to set the location points.
Editing Operation
1
Press EDIT.
[EDIT] appears in the display.
B
A
B
A
Track 1
Track 2
Track 3
Track 4
IN point
OUT point
Destination point
(continued)
3,5,6
2,4
7
1