Sony MDM-X4 - Manual (Page 39)

39 EN
Changing the Construction of a Song (Section Edit)
Moving a Section (Section
Move)
You can move a section to a different place in the song.
The section to be moved is inserted at the point
specified by the destination point.
Preparations
Set the following locate points before carrying out the
edit operation.
• IN point : the beginning of the part to be copied.
• OUT point : the end of the part to be copied.
• DEST (destination) point : the beginning of the part
to be rewritten.
See “Specifying the Location Points” (page 31) for
details on how to set the location points.
Editing Operation
1
Press EDIT.
[EDIT] appears in the display.
2
Turn the jog dial so that “Sect Move” appears in
the display.
The name of the edit function starts blinking in
the display.
3
Press ENTER.
“OK?” appears in the display.
4 Press ENTER again.
The selected edit operation is carried out.
To start over again from the beginning, or quit the
edit operation, press EXIT instead of ENTER.
When the edit operation has finished, the edit
select screen reappears.
To carry out another edit operation in succession
use the jog dial to specify the operation you
desire.
5
Press EXIT.
This completes the edit operation.
0 0 1 : M o v , O K ?
b
A B C C B A
IN point
OUT point
Destination point
The selected section is moved.
A disappears and is moved to
the destination point.
3,4
2
5
1