Sony MDM-X4 - Manual (Page 26)

26 EN
Recording
4
Press ( PLAY when you reach the point where
you want to stop recording (the punch out point).
The REC key goes out and the unit stops
recording and switches to playback mode.
5
Press p STOP.
Playback ends.
Setting the ASSIGN SW on the front of the unit to “REC
IO” lets you use a foot switch (etc.) to activate punch-
in/out recording. See “System Settings” (page 17) for
details.
(2) Using the REC SELECT key to punch-in/out
1
Turn the jog dial to set the counter to a position
before the point where you want to start
recording, then press REC.
The REC key start blinking and the unit switches
to record pause mode.
2
Press ( PLAY.
Playback starts, while the REC key continues
blinking.
3
When you reach the point where you want to start
recording (the punch in point), press the REC
SELECT key for the track you want to record.
The REC key lights steadily and recording begins
on the specified track.
4
When you reach the point where you want to stop
recording (the punch out point), press REC
SELECT key for the track being recorded or press
the ( PLAY key.
The REC key starts blinking, or goes out, and the
unit stops recording and switches to playback
mode.
5
Press p STOP.
Playback ends.
Checking the Recording
1 Turn the jog dial to set the counter to the point
you want to hear.
2
Press CUE to prepare for monitoring.
Adjust the monitor volume using the respective
TRACK knobs and the MONITOR knob.
3
Press ( PLAY.
Playback begins.
To rerecord
Follow the “Recording” procedure on the previous
page.
1
2
3
5 2,4
4,5
1
3,4