Sony MDM-X4 - Manual (Page 47)

47 EN
Editing Entire Songs (Song Edit)
5
Press ENTER again.
The song is divided at the specified point.
To start over again from the beginning, or quit the
edit operation, press EXIT instead of ENTER.
When the edit operation has finished, the edit
select screen reappears.
To carry out another edit operation in succession
use the jog dial to specify the operation you
desire.
6 Press EXIT.
This completes the edit operation.
Connecting 2 Songs (Song
Combine)
This function lets you combine two songs into one.
You can use this function to connect songs for
continuous playback, or combine a series of separate
recordings into a single song (etc.).
Note
It is not possible to perform recording operations, such as
punch-in/out recording on songs created from combinations
of other songs using the song combine edit function.
In order to perform punch-in/out recording operations after
a song combine, you must copy the entire song (Song Copy),
then record or edit the copied version of the song.
“:” blinks next to the song number of songs created using the
song combine edit function.
If “:” is blinking next to one of the two song numbers to be
combined, that song cannot be combined due to the
limitations of the MD recording system. In such a case, copy
the song (Song Copy) with the blinking “:” before
performing the song combine edit function.
See “Copying a Song (Song Copy)” on page 43 for details on
how to copy a song.
1
Press EDIT.
[EDIT] appears in the display.
2
Turn the jog dial so that “Song Combin” appears
in the display.
The name of the edit function starts blinking in
the display.
Creating one song by combining songs 2 and 3.
1 2 4 3
1 2 3
A B C D
A B C D
The start index is deleted.
Before copying
After copying
2,4,6
9
1
3,5,
7,8
,
(continued)