Sony MDM-X4 - Manual (Page 8)

8 EN
Names and Functions of Parts
9 TRACK 1~4 knobs
Use to adjust the overall sound balance when
monitoring playback from the recorder (CUE monitor)
by turning the knob for each track as desired. When
using the CUE monitor function, be sure to press down
the monitor track setting CUE key (0 below).
0 Monitor Track Setting keys
Select the sound to be monitored.
1–2 : Press down to monitor the sound from group bus
1 and 2.
3–4 : Press down to monitor the sound from group bus
3 and 4.
CUE : Press down to monitor playback from the
recorder. Use the TRACK 1~4 knobs to adjust
volume of the individual tracks.
STEREO : Press down to monitor the sound from the
stereo bus.
!¡ MONITOR knob
Adjusts the volume of the sound output from the
MONITOR OUT jacks (on the rear panel) and the
HEADPHONES jack (on the front panel).
!™ MASTER fader
Adjusts the volume of the stereo bus sound output
from the STEREO OUT jacks on the rear panel.
The Recorder
Control Panel
1 REC SELECT 1~4 keys
Press to light the corresponding track indicator(s) and
select the track(s) to be recorded. These keys also
function as in/out keys during manual punch-in/out
recording.
2 SHIFT key
Holding down this key when you press another key
lets you carry out the function written below the
respective key.
EXAMPLE: The REPEAT key
• When pressed alone, it
functions as the REPEAT key
• When pressed while holding
down SHIFT, it functions as
the DISPLAY key.