Sony MDM-X4 - Manual (Page 24)

24 EN
Recording
Recording
1 Press AUTO PUNCH when the disc is stopped.
The indicator on AUTO PUNCH lights.
REC and the indicator on RHSL start blinking,
and the unit enters record pause mode.
When “Undo Function On/Off” in the system
settings is set to “Enabl (on)”, the indicator on the
UNDO key changes accordingly.
2
Press RHSL to cancel rehearsal mode.
When “Undo Function On/Off” in the system
settings is set to “Enabl (on)”, and undo is
possible, the unit proceeds to back up the data.
3
Press ( PLAY.
Playback begins. Play together with the
previously recorded performance.
When the recorder arrives at the preset punch-in
position, record mode is activated automatically
and the input sound is recorded on the specified
track up to the punch-out point. When the
recorder reaches the punch-out point, recording
stops automatically, but playback continues until
the post-roll point is reached.
When playback is stopped the player
automatically returns to the original point.
Checking the Recording
1
Turn the jog dial to set the counter to the point
you want to hear.
Pressing the IN key automatically locates the punch-in
point.
2 Press CUE to prepare for monitoring.
Adjust the monitor volume using the respective
TRACK knobs and the MONITOR knob.
3
Press ( PLAY.
Playback begins.
To rerecord
Follow the “Recording” procedure to the left.
Using the UNDO function with auto
punch-in/out recording
You can undo the punch-in/out immediately after
execution if the system UNDO setting is set to
“Enabl (on)” and the undo indicator is lit green.
To carry out the undo function, press UNDO.
Pressing undo again lets you redo the undone
section (redo function).
Note
Carrying out another edit operation, starting a recording,
or removing the disc after carrying out the undo or redo
functions will make it impossible to undo the previous
edit operation.
Notes about the color of the indicator on the UNDO
key.
The color which the indicator on the UNDO key
lights shows the current status. (Sometimes the
indicator is off).
GREEN : undo is possible. (Redo has been carried
out.)
RED : undo has been carried out
(blinking) : in the process of carrying out the undo
(or redo) function.
(off) : undo is not possible. (In cases where the
previous operation cannot be undone (etc.).)
1
3
2
1
2
3