Sony MDM-X4 - Manual (Page 40)

40 EN
Changing the Construction of a Song (Section Edit)
Switching the Locations of 2
Sections (Section Exchange)
You can switch the location of two sections.
Preparations
Set the following locate points before carrying out the
edit operation.
• IN point : the beginning of the part to be copied.
• OUT point : the end of the part to be copied.
• DEST (destination) point : the beginning of the part
to be rewritten.
See “Specifying the Locate Points” (page 31) for details
on how to set the location points.
Editing Operation
1 Press EDIT.
[EDIT] appears in the display.
2
Turn the jog dial so that “Sect Xchnge” appears in
the display.
The name of the edit function starts blinking in
the display.
3
Press ENTER.
“OK?” appears in the display.
4 Press ENTER again.
The selected edit operation is carried out.
To start over again from the beginning, or quit the
edit operation, press EXIT instead of ENTER.
When the edit operation has finished, the edit
select screen reappears.
To carry out another edit operation in succession
use the jog dial to specify the operation you
desire.
5
Press EXIT.
This completes the edit operation.
Note
It is not possible to set the destination point between the in
and out points.
0 0 1 : X c g , O K ?
b
A B A B
IN point
OUT point
Destination point
The selected sections
are exchanged.
3,4
2
5
1