Sony MDM-X4 - Manual (Page 36)

36 EN
Editing Part of a Song (Track Edit)
3
Press ENTER.
The edit setting items appear in the display.
4
Turn the jog dial to display the setting you desire.
This determines which tracks the parts will be
exchanged to.
Use the jog dial to display the exchange
destination track number(s) below the exchange
origin track number indicator(s) (
1 mark).
Example display:
To set other tracks press ENTER and proceed to
the next step.
Press EXIT to return to the original settings.
If you do not want to specify any tracks, leave the
destination track number display empty.
5
Press ENTER.
Once all the track settings have been displayed,
“OK?” appears in the display.
6
Press ENTER again.
The selected part is copied.
If you do not wish to carry out the edit operation,
press EXIT.
When the edit operation has finished, the edit
select screen reappears.
7
Press EXIT.
This completes the edit operation.
Note
It is not possible to set the edit points to exchange
overlapping parts.
Erasing a Part (Track Erase)
You can erase part of a track. The part which was
erased becomes a part with no sound.
Preparations
Set the following locate points before carrying out the
edit operation.
• IN point : the beginning of the part to be copied.
• OUT point : the end of the part to be copied.
See “Specifying the Locate Points” (page 31) for details
on how to set the location points.
Editing Operation
1
Press EDIT.
[EDIT] appears in the display.
2 Turn the jog dial so that “Trak Erase” appears in
the display.
The name of the edit function starts blinking in
the display.
1 2
0 0 1 : X c g 2 4
b
B
A
IN
point OUT
point IN
point OUT
point
Becomes a part with no sound
3,5,6
2,4
7
1