SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 127)

Advanced Configuration
6-51
assigned to ports with slower media. (Path cost takes precedence
over port priority.)
• Range: 1-65535
• Default: Ethernet interface: 19; Wireless interface: 40
Priority – Defines the priority used for this port in the Spanning
Tree Protocol. If the path cost for all ports on a switch are the
same, the port with the highest priority (i.e., lowest value) will be
configured as an active link in the spanning tree. This makes a
port with higher priority less likely to be blocked if the Spanning
Tree Protocol is detecting network loops. Where more than one
port is assigned the highest priority, the port with lowest numeric
identifier will be enabled.
• Default: 128
• Range: 0-240, in steps of 16