SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 261)

Ethernet Interface Commands
7-91
Ethernet Interface Commands
The commands described in this section configure connection
parameters for the Ethernet interface.
interface ethernet
This command enters Ethernet interface configuration mode.
Syntax
interface ethernet
Default Setting
None
Command Mode
Global Configuration
Command Function Mode Page
interface ethernet Enters Ethernet interface
configuration mode GC 7-91
dns primary-server Specifies the primary name server IC-E 7-92
dns
secondary-server Specifies the secondary name
server IC-E 7-92
ip address Sets the IP address for the
Ethernet interface IC-E 7-93
ip dhcp Submits a DHCP request for an IP
address IC-E 7-94
shutdown Disables the Ethernet interface IC-E 7-95
show interface
ethernet Shows the status for the Ethernet
interface Exec 7-96