SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 203)

System Clock Commands
7-33
degrees longitude. To display a time corresponding to your
local time, you must indicate the number of hours and minutes
your time zone is east (before) or west (after) of UTC.
Example
show sntp
This command displays the current time and configuration
settings for the SNTP client.
Command Mode
Exec
Example
AP(config)#sntp-server timezone +8
AP(config)#
AP#show sntp
SNTP Information
=========================================================
Service State : Enabled
SNTP (server 1) IP : 137.92.140.80
SNTP (server 2) IP : 192.43.244.18
Current Time : 08 : 04, Jun 20th, 2003
Time Zone : +8 (TAIPEI, BEIJING)
Daylight Saving : Enabled, from Jun, 1st to Sep, 1st
=========================================================
AP#