SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 84)

System Configuration
6-8
DHCP Client (Enable) – Select this option to obtain the IP
settings for the wireless bridge from a DHCP (Dynamic Host
Configuration Protocol) server. The IP address, subnet mask,
default gateway, and Domain Name Server (DNS) address are
dynamically assigned to the wireless bridge by the network
DHCP server.
(Default: Enabled)
DHCP Client (Disable) – Select this option to manually configure
a static address for the wireless bridge.
• IP Address: The IP address of the wireless bridge. Valid IP
addresses consist of four decimal numbers, 0 to 255,
separated by periods.
• Subnet Mask: The mask that identifies the host address bits
used for routing to specific subnets.