SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 129)

Advanced Configuration
6-53
CLI Commands for STP – The following example configures
spanning tree paramters for the bridge and wireless port 5.
AP(config)#bridge stp-bridge priority 40000 7-70
AP(config)#bridge stp-bridge hello-time 5 7-68
AP(config)#bridge stp-bridge max-age 38 7-69
AP(config)#bridge stp-bridge forward-time 20 7-67
AP(config)#no bridge stp-port spanning-disabled 5 7-74
AP(config)#bridge stp-port priority 5 0 7-72
AP(config)#bridge stp-port path-cost 5 50 7-71
AP(config)#no bridge stp-port portfast 5 7-73
AP(config)#end
AP#show bridge
7-75
Bridge Information
=================================================
Media Type | Age Time(sec)|
=================================================
EtherNet | 300 |
WLAN_A | 1000 |
==================================================
Bridge Id : 32768.037fbef192
Root Bridge Id : 32768.01f47483e2
Root Path Cost : 25
Root Port Id : 0
Bridge Status : Enabled
Bridge Priority : 40000
Bridge Hello Time : 5 Seconds
Bridge Maximum Age : 38 Seconds
Bridge Forward Delay: 20 Seconds
============================= Port Summary
=============================
Id| Priority | Path Cost | Fast Forward | Status | State
|
0 128 25 Enable Enabled Forwarding
AP#