SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 182)

Command Line Interface
7-12
Example
This example shows how to return to the Exec mode from the
Interface Configuration mode, and then quit the CLI session:
ping
This command sends ICMP echo request packets to another
node on the network.
Syntax
ping <host_name | ip_address>
• host_name - Alias of the host.
• ip_address - IP address of the host.
Default Setting
None
Command Mode
Exec
Command Usage
• Use the ping command to see if another site on the network
can be reached.
• The following are some results of the ping command:
– Normal response - The normal response occurs in one to
ten seconds, depending on network traffic.
– Destination does not respond - If the host does not
respond, a “timeout” appears in ten seconds.
– Destination unreachable - The gateway for this destination
indicates that the destination is unreachable.
AP(if-ethernet)#exit
AP#exit
CLI session with the wireless bridge is now closed
Username: