SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 90)

System Configuration
6-14
PPP over Ethernet – Enable PPPoE on the RJ-45 Ethernet
interface to pass management traffic between the unit and a
remote PPPoE server. (Default: Disable)
PPPoE Username – The user name assigned for the PPPoE
tunnel. (Range: 1-63 alphanumeric characters)
PPPoE Password – The password assigned for the PPPoE
tunnel. (Range: 1-63 alphanumeric characters)
Confirm Password – Use this field to confirm the PPPoE
password.
PPPoE Service Name – The service name assigned for the
PPPoE tunnel. The service name is normally optional, but may be
required by some service providers. (Range: 1-63 alphanumeric
characters)