SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 235)

Bridge Commands
7-65
Bridge Commands
The commands described in this section are used to set the MAC
address table aging time and spanning tree parameters for both
the Ethernet and wireless interfaces.
Command Function Mode Page
bridge timeout Sets the aging time for the address
table GC 7-66
bridge stp-bridge
spanning-tree Enables the spanning tree protocol
for the bridge GC 7-66
bridge stp-bridge
forward-time Configures the spanning tree
bridge forward time GC 7-67
bridge stp-bridge
hello-time Configures the spanning tree
bridge hello time GC 7-68
bridge stp-bridge
max-age Configures the spanning tree
bridge maximum age GC 7-69
bridge stp-bridge
priority Configures the spanning tree
bridge priority GC 7-70
bridge stp-port
path-cost Configures the spanning tree path
cost of a port GC 7-71
bridge stp-port
priority Configures the spanning tree
priority of a port GC 7-72
bridge stp-port
portfast Sets a port to fast forwarding GC 7-73
bridge stp-port
spanning-disabled Disables the spanning tree protocol
on a port GC 7-74
show bridge Displays the current aging time
settings Exec 7-75