Pppoe password, Pppoe password -88 – SMC Networks ElliteConnect 2.4GHz/5GHz User Manual
Page 258
Advertising
Command Line Interface
7-88
Command Usage
You must enter a user name with this command, and a
password with the pppoe password command.
Example
Related Commands
pppoe password
This command sets the password for the PPPoE tunnel.
Syntax
pppoe password <string>
string - Password assigned by the service provider.
(Range: 1-63 alphanumeric characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
You must enter a password with this command, and a user
name with the pppoe username command.
Example
Related Commands
AP#(if-ethernet)#pppoe username mike
AP#
AP#(if-ethernet)#pppoe password 12345
AP#
Advertising