SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 147)

Radio Interface
6-71
CLI Commands for AES Security – From the 802.11a interface
configuration mode, use the encryption command to enable AES
encryption. To enter AES keys, use the key command. To view
the current security settings, use the show interface wireless a
command.
Note: The key type value entered using the key command must be the
same as the type specified in the encryption command.
AP(config)#interface wireless a 7-99
Enter Wireless configuration commands, one per line.
AP(if-wireless a)#encryption wdsaes alphanumeric
7-110
AP(if-wireless a)#key wdsaes 1 agoodsecretkey 7-112
AP(if-wireless a)#exit
AP#show interface wireless a
7-120
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description : Enterprise 802.11a Wireless Outdoor
Bridge/AP
Service Type : WDS Bridge
SSID : DualBandOutdoor
Turbo Mode : OFF
Channel : 36
Status : Disable
----------------802.11 Parameters--------------------------
Transmit Power : FULL (15 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Maximum Association : 64 stations
----------------Security-----------------------------------
Encryption : 128-BIT AES ENCRYPTION
AES Key type : Alphanumeric
===========================================================
AP#