SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 253)

PPPoE Commands
7-83
Example
Related Commands
pppoe local ip (page 7-86)
pppoe remote ip (page 7-86)
pppoe ipcp dns
This command requests allocation of IP addresses for Dynamic
Naming System (DNS) servers from the device at the remote end
of the PPPoE tunnel.
Syntax
pppoe ipcp dns
no pppoe ipcp dns
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Command Usage
DNS servers are used to translate host computer names into
IP addresses. PPPoE clients can request a primary and
secondary DNS server from the network connection device at
the remote end of the PPPoE tunnel. This request is passed to
the remote end during the IP Control Protocol (IPCP)
negotiation phase during session initialization.
Example
AP#(if-ethernet)#pppoe ip allocation mode static
AP#
AP#(if-ethernet)#pppoe ipcp dns
AP#