SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 181)

General Commands
7-11
Command Mode
Exec
Example
Related Commands
end (page 7-11)
end
This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode
from the Interface Configuration mode:
exit
This command returns to the Exec mode or exits the
configuration program.
Default Setting
None
Command Mode
Any
AP#configure
AP(config)#
AP(if-ethernet)#end
AP(config)#